Protek Wood Stain And Protect - Clear Tough Coat

Protek Wood Stain and Protect - Clear Strong Coat is a high quality, clear wood protector that weatherproofs and protects a wide range of exterior timber, allowing it to grey naturally in the sun. Dries from a milky liquid to a hard wearing clear coat, it can also be used as a top coat over the range of Protek Wood Stain And Protect colours, providing added protection and water repellency for high wear and tear areas.

This product creates a quick-drying microporous coating that contains mould inhibitors to protect the coating. Once dry it is harmless to plants, children and animals making it the perfect choice not only for fencing and sheds, but playhouses and animal housing.

Please note: This product is not suitable for decking.

• Want to add a splash of colour to your garden project, use Protek Wood Stain and Protect
• Need an alternative exterior wood paint or stain? Consider Protek Royal Exterior Paint or Protek Royal Exterior Stain

Surfaces should be cleaned with warm water, detergent and a stiff brush. Make sure that all mould or algae is removed and rinse substrate well. Ensure that timber is fully dry. For the best results, previous treatments should be removed or well weathered.

If coating new wood, it is recommended that a suitable, wax free wood preservative treatment is used and allowed to fully dry before application.

Mix well before use. Protek Wood Stain & Protect - Clear Tough Coat is of a stain consistency that allows it to be easily applied by a garden sprayer, brush or roller. Do not apply in temperatures below 5°C or if wet weather is expected within 48 hours.

1. Apply 1 - 2 full, flowing coats
2. Allow each coat to dry before applying the next
3. Splashes and drips can only be cleaned with warm water and detergent whilst still wet

Keep freshly coated surfaces safe from animals and small children for 48 hours or until surfaces are dry.

Cleaning Equipment

Remove excess product from the brush or roller and wash with warm water and detergent. Wash all sprayer components immediately after use with warm water and detergent.

Maintain Protek Wood Stain and Protect - Clear Tough Coat every 2 - 5 years or as required by cleaning the surface of the wood and following the preparation and application instructions above.

Protek Wood Stain and Protect  contains a borate fungicide. This is a natural borate mineral salt. This natural form of boron is actually good for plants and harmless to people and animals. This borate is said to be only half as dangerous for humans and animals as table salt but effective against fungi and insects.