Projects (A-Z)
Brands (A-Z)
Hammerite Direct to Rust Metal Paint Smooth Finish
£10.27 - £74.10
£10.27 - £74.10
Quantity
|
|
FREE Delivery over £60.
Order by 4pm for next day option*
Order by 4pm for next day option*
A durable metal paint designed to be applied directly onto rust with minimal surface preparation. Offers 8 Years protection.
Features
- Corrosion resistant decorative paint for exterior use
- Applies directly to rusty metal
- No need for primer or undercoat
- Dries to a high quality, smooth gloss finish
- Solvent-based with a high VOC content
| Brand | Hammerite |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 5m² per litre |
| Drying time | 4 hrs |
| Size | 250ml, 750ml, 2.5L, 5L |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Customers Also Bought
Previous
Next
Overview
Hammerite Direct to Rust Metal Paint Smooth Finish is a tough and durable, decorative paint for either interior and exterior projects. It can be used for either ferrous and non-ferrous metals and is ideal for use on doors, gates, railings, garden furniture and more. It can be applied directly on to rusted metal surfaces with virtually no surface preparation needed and offers up to 8 years protection.
If a satin finish is required then please visit Hammerite Direct to Rust Metal Paint
Preparation
For the best results, ensure surfaces to be coated are sound, clean and free from all defective or poorly adhering material such as dirt, grease, rust or paint.
- Put down dust sheets to protect flooring or other areas from accidental spillages
- Remove any loose rust, corrosion or flaking paint prior to coating, using either a wire brush, sanding or light blast cleaning
- If the metal surface is already painted then clean with a detergent and thoroughly rinse
- Lightly abrade smooth metal surfaces to form a sound key, with rinsing thoroughly and allow to dry
- Repair any cracks or holes with a suitable metal filler and allow to harden
Application
Always do a small test area to assess colour and compatibility of the finish.
- If there is any adverse reaction, this will appear with 1 hour. If a reaction occurs, remove all paint and wash down with a degreaser. Rinse with warm water and allow to dry.
Follow the manufacturer's instructions on the tin at all times.
- Ideally, apply avoiding extremes of temperature, between 8-35°c
- Lightly stir the paint and do not mix vigorously
- Apply using a good quality synthetic brush or microfibre roller
- For best results, 2 thin coats are recommended
- Leave 4 hours drying time between coats
Reviews
Back