Woca Clean and Care Kit Oiled Wood Floors

Woca Clean and Care Kit Oiled Wood Floors contains everything needed for the maintenance and upkeep of solid wood and engineered wooden flooring. Enhances the natural colour and look of the wood, whilst maintaining and protecting its finish.

Woca Clean and Care Kit Oiled Wood Floors contains:

• Woca Natural Soap, 1L - For regular cleaning and maintenance of interior oiled wooden surfaces.
• Woca Intensive Wood Cleaner, 250ml - A concentrated wood cleaner specifically developed for the deep cleaning of interior wood floors and more.
• Woca Maintenance Oil, 1L - A durable maintenance oil which enhances and protects engineered and solid wooden flooring.
• Spray Nozzle - Attaches to the maintenance oil container for an even application of oil.
• White Applicator Pad - Use the supplied applicator pad to polish the oil in fully.
• Lint-free Cloth - For removing all excess oil from the surface of the wood after polishing.
• Instructions and advice booklet

Ensure areas to be treated are clean, dry and free of any loose dirt, grit or other surface contaminants by vacuuming or sweeping.

1. Following the product instructions, thoroughly clean the area first, using the Woca Intensive Wood Cleaner
2. Allow to dry for at least 8 hours before applying the worktop oil

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

Ensure normal room temperature of between 15 - 35°C and use only in well ventilated areas. This product is ready to use and does not require thinning. Shake the container carefully before and during use.

1. Attached the spray nozzle directly to the oil container
2. Working in small sections, spray an even film of maintenance oil onto the wooden surface
3. Using the applicator pad provided, polish in well, following the grain of the wood wherever possible
4. A buffing machine can be used for larger areas
5. Wipe off any excess with the clean, lint-free cloth supplied
6. Then continue onto the next section

The finished area can be subjected to light use after 4 - 6 hours, if polished with a machine or 24 - 48 hours if polished by hand. It won't be fully cured for a further 3 days, so will need to be protected from dirt and water to prevent staining and discoloration. Any spills should be wiped up immediately. The following precautions should be taken in the first 3 days of use:

• Do not cover (use protective sheets) or lay rugs onto the area
• Do not move heavy furniture around
• Immediately wipe up any water or other liquid spillages and take particular care with flower pots
• Subsequently, appropriate protective measures (i.e. felt pads) should be taken for table and chair legs or other objects which could mark the floor
• If applicable, a quality doormat at the entrance will be of benefit

Please Note: Newly oiled floors should not be cleaned with water or cleaning solutions for the first few days whilst curing. Remove dust with a vacuum cleaner, brush or cloth (do not use impregnated fabrics)

Regular Cleaning

Clean surfaces weekly using a dampened, cotton cloth and Woca Natural Soap or Woca Natural Soap Spray.

Deep Cleaning

If floors and surfaces begin to look worn or tired over time, simply clean and refresh them on a monthly basis using Woca Oil Refreshing Soap or Woca Oil Refreshing Soap Spray.

Do not use household detergents or bleaches as these will degrade the finish.

If the finish becomes tired looking and damaged over time, apply Woca Master Colour Oil.