Projects (A-Z)
Brands (A-Z)
Siroflex SX Mighty Strength Grip and Grab Adhesive
£6.59
£6.59
Quantity
|
|
FREE Delivery over £60.
Order by 4pm for next day option*
Order by 4pm for next day option*
An adhesive giving superior adhesion to a wide range of surfaces and is water and weather resistant
Features
- Ultra strong and instant grab to a substrate
- High elasticity with high strength
- No shrinkage, bubble free and is neutral curing
- Weather and water resistant
- Heat resistant from temperatures of -40°C to +90°C
| Brand | Siroflex SX |
|---|---|
| Drying time | 24 hrs |
| Size | 290ml |
| MPN | 31050825 |
| GTIN | 5032822007597 |
Overview
An extremely strong adhesive designed to be used in a wide variety of circumstances without the use of a primer. Suitable for bonding most building suubstrates but in particular, for fixing large panels, wallboads and mirrors. It will adhere to virtually everything inlcluding wood, natural stone, mirrors, concrete, metal, mortar, bricks, gypsum and glass. Also, Siroflex SX Mighty Strength Grip and Grab Adhesive is fully compatible with the ProDec Extra Strong Caulking Gun.
Preparation
To attain optimum results, the surfaces need to be structurally sound, clean, dry and free from dirt, dust or any other surface contaminants.
- Any old, substandard and flaking paint needs to be removed either by sanding or with the use of a paint scraper
- Further care should be taken during surface preparation of pre-1960s paint surfaces as they may contain dangerous levels of lead
- An antifungal will need to be used if there is evidence of organic growth, such as mould, fungal, algal or lichen growths
- Wash the surface with a suitable detergent to remove any dirt, grease and dusty or powdery residues
- If required, rub down surfaces and then wipe off with a damp, lint-free cloth to remove dust
- Place masking tape along the edges of the application area to help maintain a straight clean edge
Please Note: Siroflex SX Mighty Strength Grip and Grab Adhesive is not suitable for continuous water submersion or to be in constant contact with chlorine via swimming pools
Application
Always produce a test area beforehand to assess product suitability and the final finish. Follow the manufacturer's instructions on the tube at all times.
- Cut the cap off the screw part of the tube to open
- Attach the supplied nozzle to the tube
- Place the tube into a skeleton gun
- Apply Siroflex SX Mighty Strength Grip and Grab Adhesive into the gap or joint, ensuring a good solid fill
- Always tool using a spatula or a wetted stick within 10 minutes of application
- If masking tape has been used, then remove the masking tape within 10 minutes of applying
- Uncured sealant can be cleaned off with water
Back