Projects (A-Z)
Brands (A-Z)
Liberon Wax and Polish Remover
£10.07 - £18.89
£10.07 - £18.89
Quantity
|
|
FREE Delivery over £60.
Order by 4pm for next day option*
Order by 4pm for next day option*
Removes wax and grime and cleans all interior wood.
Features
- An effective, solvent-based wax and polish remover for furniture
- Removes old wax, polish, dirt, smoke and grime
- Safe to use on most hard finishes whilst retaining the original finish or patina
- Suitable for use on French polishes, varnish, lacquer and oil finishes
- Leaves antique and other furniture surfaces ready for re-finishing
- Very high V.O.C
| Brand | Liberon |
|---|---|
| No. of coats | 1-2 |
| Coverage | Up to 12m² per litre |
| Drying time | 24 hrs |
| Size | 250ml, 500ml, 1L |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Customers Also Bought
Previous
Next
Overview
Liberon Wax and Polish Remover is a versatile surface cleaner for antique and modern wood furniture. It can also be used on other interior woodwork, including wooden doors, beams, dado rails and banisters, without harming the original finish and patina.
The unique formulation should not lift veneers or raise the grain, making it suitable for even the most delicate surfaces. Use to remove built-up layers of wax which may be causing a haze or bloom on the surface.
Please Note: This product is not suitable for use on build-ups of wax or grime on top of water-based varnishes. Do not pour into plastic containers or use on plastic or vinyl surfaces.
- Remove any existing varnish finishes with a suitable paint stripper or varnish remover
Application
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
- For best results, soak a pad of Liberon Ultra Fine (0000) Steel Wool in Liberon Wax and Polish Remover, squeeze out the excess and gently wash the surface, going with the grain where possible
- Allow a few minutes for the Wax and Polish Remover to work then, while the surface is still wet, use a clean lint-free cloth to wipe off all the old softened wax
- Repeat this process until all the old wax is removed
- Allow 24 hours for the treated surface to dry completely before re-finishing
Finishing
Once fully dry, the surface can be re-finished with a suitable Liberon finishing product or with a suitable product from an alternative brand.
Datasheets
Reviews
Back