Projects (A-Z)
Brands (A-Z)
Hammerite Direct to Rust Metal Paint Hammered Finish
£10.27 - £77.19
£10.27 - £77.19
Quantity
|
|
FREE Delivery over £60.
Order by 5pm for next day option*
Order by 5pm for next day option*
A tough and durable metal paint offering up to 8 years protection. Designed to be applied directly onto rust with very little surface preparation needed
Features
- Corrosion resistant and durable paint for exterior use
- Can be applied directly to rusty metal
- Self priming paint negates the need to prime or undercoat
- Can be applied either by a roller or a brush
- Solvent based and is suitable for interior and exterior use
| Brand | Hammerite |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 5m² per litre |
| Drying time | 4 hrs |
| Size | 250ml, 750ml, 2.5L, 5L |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Customers Also Bought
Previous
Next
Overview
Hammerite Direct to Rust Metal Paint Hammered finish provides a tough, durable and decorative coating for exterior and interior projects. Suitable for either non-ferrous or ferrous metals and is ideal for use on metal doors, gates, railings, garden furniture and more. It can offer up to 8 years protection and can be applied directly on to rusted metal surfaces with virtually no surface preparation needed.
Hammerite Direct to Rust Metal Paint is also available in two diiferent finishes:
Preparation
For the best results, ensure surfaces to be coated are structurally sound, free from all defective or poorly adhering material and clean from dirt, grease, rust or paint.
- Put down dust sheets to protect anything you don't want to get paint on
- Loose rust, flaking paint or debris will need to be removed prior to coating, using a wire brush, sanding or light blast cleaning
- If the metal surface is already painted then clean with a suitable detergent, thoroughly rinse and allow to dry
- Repair any cracks or holes with a suitable metal filler and allow to harden
- Lightly abrade smooth metal surfaces to form a sound key. Rinse thoroughly and allow to dry
Application
Always perform a small test area to assess colour and compatibility of the finish.
- If there is any adverse reaction, this will appear with 1 hour. If a reaction occurs, remove all paint and wash down with a degreaser. Rinse with warm water and allow to dry.
Follow the manufacturer's instructions on the tin at all times.
- Ideally, apply avoiding extremes of temperature, between 8-35°c
- Lightly stir the paint and do not mix vigorously
- Apply using a good quality synthetic brush or microfibre roller
- For best results, 2 thin coats are recommended
- Leave 4 hours drying time between coats
Reviews
Back