Dulux Trade Weathershield Exterior Flexible Filler

Dulux Trade Weathershield Exterior Flexible Filler is a lightweight, easy to use filler ideal for making good minor imperfections in wood, plaster and brickwork. It has superior flexibility and adhesion, giving it excellent resistance to shrinkage and cracking. When dry Dulux Trade Weathershield Exterior Flexible Filler is easy to rub down smooth, ready for painting.

Please Note: It is not suitable for use with varnish systems, as a fine surface filler or for major repairs.

To get the best results, ensure surfaces to be painted are clean, dry and free from all defective or poorly adhering material.

1. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
2. Remove all loose material from cracks and open joints
3. Cut out all rotten wood and replace with new timber
4. Where necessary, surfaces should be thoroughly rubbed down using wet flatting methods where possible, then wipe off with a damp, lint-free cloth
5. Prime the bare area with an appropriate Dulux Trade or Weathershield primer and allow to dry before making good the defect with Dulux Trade Weathershield Exterior Flexible Filler

Please Note: Minor defects in masonry can be made good with Dulux Trade Wethershield Exterior Flexible Filler, but use sand and cement for larger holes and cracks.

1. Stir thoroughly before use
2. This product does not require thinning, but may be made easier to use by adding a few drops of clean water and then mixing to a stiff paste
3. The product can be applied using a putty knife or other suitable tool
4. Dampen the area to be made good, using a clean damp sponge and then press the filler firmly into the defect
5. Leave a small excess of the filler to allow for any sinkage and rub down smooth when dry
6. Drying time is variable depending on the depth of repair and will take significantly longer in cold, damp conditions, but allow at least overnight before rubbing down