Dulux Trade Durable Flat Matt Paint

Based on unique AkzoNobel technology Dulux Trade Durable Flat Matt is a water-based emulsion paint that is perfect for interior walls and ceilings. It offers a tough, durable flat-matt finish that is washable making it ideal for busy household and commercial environments.

• For a standard matt emulsion paint finish, use Dulux Trade Vinyl Matt
• For a mid-sheen emulsion paint finish, use Dulux Trade Vinyl Soft Sheen
• For a silk-sheen emulsion paint finish, use Dulux Trade Vinyl Silk
• For a durable matt emulsion, suitable for bathrooms and kitchens, try Dulux Trade Diamond Matt

For the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).

1. Remove all loose and defective paint by sanding, using a scraper or suitable paint stripper
2. Special precautions should be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful lead
3. Where necessary, wipe the surface with a dampened lint-free cloth to remove dirt, grease and powdery or dusty residues prior to painting
4. Any surface defects should be filled with an appropriate filler
5. If required, rub down surfaces and then wipe off with a damp, lint-free cloth to remove dust
6. Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer, or use Dulux Trade Stain Block Matt, which will also seal in any stains

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

Do not apply in temperatures below 8°C. For the best colour consistency, purchase sufficient tinted paint for each job, including touch-in, at one time from the same source.

1. Stir the paint thoroughly before and periodically during use
2. Apply Dulux Trade paint with a good quality synthetic paint brush, microfibre roller, conventional spray or airless spray system
3. Seal new or bare surfaces with a thinned first coat of Dulux Trade Durable Flat Matt (up to 1 part clean water to 5 parts paint)
4. The normal finishing process is 2 full coats of Dulux Trade Flat Matt, but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient
5. Allow 3 hours to fully dry

Thinning Guidelines

• Sealing new or bare surfaces: Add up to 1 part clean water to 5 parts paint
• Normal use (not to be exceeded): Add up to 1 part clean water to 10 parts paint
• Conventional spray application: Add up to 1 part clean water to 2.5 parts paint
• Airless spray application: Add up to 1 part clean water to 5 parts paint

Maintenance

To maintain the finish, simply apply a fresh coat of Dulux Trade Durable Flat Matt paint as required, following the Preparation and Application instructions above.