Projects (A-Z)
Brands (A-Z)
Crown Multi Surface Primer and Undercoat
£24.71 - £42.69
£24.71 - £42.69
Quantity
|
|
FREE Delivery over £60.
Order by 4pm for next day option*
Order by 4pm for next day option*
A quick drying water-based paint suitable for use on a variety of surfaces both inside and outside the home
Features
- A water-based primer for interior and exterior use
- Seals and prepares the surface
- Ideal for use on wood, metal and masonry
- Quick drying
- Vegan verified
- Minimal VOC Content
| Brand | Crown |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 16m² per litre |
| Drying time | 1 hr |
| Size | 750ml, 2.5L |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Overview
Crown Multi Surface Primer and Undercoat is ideal to seal, prepare and block stains on multiple surfaces with the quick drying water-based primer suitable for interior and exterior wood, metal, PVCu. plasterboard, MDF, melamine, brick, non-ferrous metal, stone, ceramic tiles and glass.
Preparation
For the best results, ensure surfaces to be primed are clean, dry (new surfaces particularly must be fully dry) and free of dirt, grease or wax before treating.
- Thoroughly rub down previously painted surfaces, using wet flatting methods where possible, then wipe off with a damp, lint-free cloth or vacuum to remove all traces of sanding dust
- Abrade any pre-painted surfaces to provide a key for the undercoat to adhere to
- Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
- Any surface defects should be filled with an appropriate filler
- Treat any knots in wood with an appropriate knotting solution
- For iron and steel surfaces, ensure all loose scale and rust is removed by thorough scraping and wire brushing
- Leave new bright galvanised metal to weather and become dull before priming
Application
Always do a test area before starting any project and follow the manufacturer's instructions on the tin at all times.
- Avoid applying in damp, humid conditions or in a room temperature lower than 10°C
- Stir the undercoat thoroughly before and periodically during use
- Apply Crown Multi Surface Primer Undercoat with a good quality synthetic paint brush
- Apply the paint evenly over the surface avoiding overspreading the layer of paint
- If covering a large area decant into a suitable container and use a 3 inch brush and apply quickly
- On uncoated porous surfaces the first coat can be thinned with up to 50% clean water
- In warm conditions the primer can dry rapidly and over-brushing should be avoided
- A drying time of 1 hour is recommended between coats
Aftercare
Once fully dry, primed surfaces can be over-coated with a suitable Crown top coat
Back