Ciranova Woodlook Plus

Ciranova Woodlook Plus is an invisible, 35% Bio-based, environmentally friendly, water-Based PU impregnating oil for parquet and wooden furniture. The wood will have a slightly bleached and ultra-matt appearence. Woodlook Plus is non-yellowing and has anti-slip properties.

Looking for more of an intense finish? Try Ciranova Oculto Plus

For a natural finish, try Ciranova Ecofix Plus

Ensure that surfaces to be treated are clean, dry and free from dust, dirt or any other surface contaminants.

1. Make sure that all old finish coats are completely removed and the wood is free from dust and other dirt
2. Sanding using the correct method, deep sanding with 60-80-100 grit then sanding with 100 grit
3. Can be used on sanded, planed and brushed wood

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

Ciranova Woodlook Plus can be used both as a primer and as a finishing coat. It can be applied in three coats.

1. Stir thoroughly before use and do not dilute
2. Appy the product using a roller or brush. A short-pile roller is recommended
3. Apply the first coat in the direction of the wood
4. After 4 - 6 hours apply a second coat in the same way as the first
5. Let it dry for 12 - 24 hours and afterwards do an intermediate sanding using grit 180 - 220, then apply the third coat
6. Optional: A hardener plus (10%) can be added to increase the chemical and mechanical resistances if required

Drying Times

1. Dust dry: 20 to 30 minutes
2. Sandable: after 4 to 6 hours
3. Lightly walkable: after 24 hours
4. Fully cured: 7 days

Ciranova Woodlook Plus can be used both as a primer and as a finishing coat.

For regular maintenance it is recommended to use Ciranova Hard Floor Fresh. Use Ciranova Unicare X-Matt for periodic maintenance use. Ciranova Hard Floor Cleaner is used for cleaning highly solied floors and to remove old layers of polish.